DJI NAZA-M V2 Multi-rotor Flight Controller and NAZA-M V2 GPS
DJI adheres to continuous innovating and improving, with the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic controlling.
INDEPENDENT PMU WITH AMAZING FUNCTION EXTENSION
The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)
ADVANCED & IMPROVED ATTITUDE STABILIZATION ALGORITHM
The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.
NINE TYPES OF MULTI-ROTORS SUPPORTED
Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
Quad I, Quad X;
Hexa I, Hexa V, Hexa Y, Hexa IY;
Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please pay attention to the vibration situation and try to do some vibration dampening);
MULTIPLE FLIGHT CONTROL MODES/INTELLIGENT SWITCHING
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. Customer can switch among the three modes to adjust different flight environment. It also can adjust automatically in the flight environment and intelligent switch between GPS Atti. Mode and Atti. Mode to make sure the safety and security of flight. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.
GPS MODULE AVAILABLE/ACCURATE POSITION HOLD
The plug and play GPS module will greatly enhance the performance for entry AP with Position Hold, Return-To-Home and Intelligent Orientation Control functions. With GPS Module, the multi-rotors will have position and altitude locked even in windy conditions. Hovering accuracy is about 2.5m horizontal and 0.8m vertical.
INTELLIGENT ORIENTATION CONTROL
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：
In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2)：
ENHANCED FAILSAFE MODE
If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.
TWO LEVELS OF LOW VOLTAGE PROTECTIONS
In order to prevent your multi-rotor from crash or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use, however we strongly recommend you to open the protections. All two level protections have LED warning as default. The first level will blink red light ceaselessly; the second level will blink red light ceaselessly and the multi-rotor will descend. In manual mode when low voltage protection is triggered the LED warning will be on and no further actions.
MOTOR ARM AND MOTOR DIS-ARM
Motor Arm: There are four ways to start the motors, see picture on the right:
In any situation you want to start the aircraft you need to perform any of the ways of CSC. During the flight, if the motors stall, you immediately execute the CSC and the motor will start, which enhanced the safety of the aircraft during the flight.
Motor Disarm: the same four ways of Motor Arm to stop the motors, and it has Intelligent Mode and Immediate Mode. For more information, please refer user manuel or DJI Wiki.
Note: And a new way of take-off, which is more stable and provides a brand-new experience and supports double spring RC operations, when you let go of the throttle stick the aircraft will hover.
PPM, S-BUS & ORDINARY RECEIVER SUPPORTED
Four channels and more than four-channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel function are set in a channel of X2, use only one servo cable to connect the PPM or S-Bus to X2 can makes installation quick and easy, not easy to make mistakes.
INDEPENDENT LED MODULE
The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.
BUILT-IN GIMBAL STABILIZATION FUNCTION
The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.
MULTI-ROTOR ONE-POWER OUTPUT FAIL PROTECTION
In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. Payload heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure causes rudder out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, makes attitude still under control even with any one power output failed and highly reduces crash risk.
REMOTE GAIN ADJUSTMENT
The default parameter settings is OK for you to achieve a normal flight, and it also supports remote parameters adjustment by using the knob on the TX during flight, in order to obtain the better performance.
NEW ASSISTANT SOFTWARE & FIRMWARE ONLINE UPDATE
The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience, and instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is detailed introduction. The logical design makes your parameter settings more simple and convenient. Like other DJI products，easy firmware upgrade, extendible port for future use is available.
Specification:BASIC PERFORMANCE Supported Multi-rotor Supported ESC output Recommended Transmitter Working Voltage Range Quad-rotor I4, X4
Hex-rotor I6, X6, IY6, Y6
400Hz refresh frequency PCM or 2.4GHz with minimum 4 channels MC:4.8V~5.5V
VU Input: 7.4V ~ 26.0 V
(recommend 2S ~ 6S LiPo)
Output(V-SEN port red wire): 3A@5V
Power Consumption Operating Temperature Assistant Software System Requirement MAX: 3.15W(0.25A@12.6V)
-10°C ~ 50°C Windows XP sp3 / Windows 7 / Windows 8FLIGHT PERFORMANCE Hovering Accuracy
Max Yaw Angular Velocity Max Tilt Angle Ascent / Descent Vertical:±0.8m
200°/s 35° 6m/s，4.5m/sHARDWARE Weight Dimensions Built-In Functions MC:27g
MC: 45.5mm x 32.5mm x 18.5mm
PMU: 39.5mm x 27.5mm x 10.0mm
GPS & Compass 46mm(diameter)x10mm
LED: 25mm x 25mm x 7.0mm
Multiple Autopilot Control Mode
Low Voltage Protection
S-Bus Receiver Support
PPM Receiver Support
Independent PMU Module
2-axle Gimbal Support
What’s difference of NAZA-M Lite/NAZA-M V1/NAZA-M V2ProductTarget CustomerHardwareSoftwareFunction Extension AbilityMajor Components NAZA-M Lite AP/RC entry level Based on NAZA V1 platform; no extension ability NAZA lite Independent assistant software and firmware; 1.GPS (Optional)
2.No extended function (does not support NAZAV2-PMU, Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD)
BEC/LED（Will have independent BEC and LED in the future）
NAZA-M V1 AP/RC hobbyist Can be connected to the NAZA V2-PMU, and will have the NAZA-M V2 expansion function; Share the same NAZAM V2 assistant software and firmware; 1.GPS (Optional)
2.Function extension through NAZAV2-PMU: such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station
NAZA-M V2+GPS Combo AP/RC hobbyist Optimized hardware structure;
Independent PMU module with amazing function extension ability;
Independent LED module;
Amazing function extension：such as Zenmuse H3-2D/NAZA OSD/NAZA BT module/IOSD/Ground Station MC
1 * DJI NAZA-M V2 Multi-rotor Flight Controller
1 * DJI NAZA-M V2 GPS Module
1 * DJI NAZA-M PMU V2 Multi-function Module
1 * DJI NAZA-M V2 LED Module
Ship to: Qty.: Courrier Shipping Cost Shipping Time Total Time
This page shows you how to choose a shipping method for your order, estimate shipping cost and shipping times, and gives other useful information on hobbywow.com shipping process.
On this page:
Choose a Shipping Method
Super saver shipping
Mode of transport：Hong Kong packet
Delivery Time: 12-35 Working days
●Run by the postal office.
●Delivery time depend on different countries.
●The lowest cost among all shipping method.
●Only limited to small package, good for spare parts（Lower than 2kg）.
Mode of transport：EMS,HK EMS
Delivery Time: 6-12 Working days
●Run by the postal office.
●Delivery time is fast, but slower than Express.
●Tracking info is more detail than Super saver shipping.
Express (Dimension Weight)
Mode of transport：DHL,UPS,Fedex
Delivery Time: 4-8 Working days
●Delivery time is very fast, just 7-11 Working Days to most of the countries.
●The most safety shipping method.
●The size of the package is a good choice.
HobbyWOW.com makes paying for your orders easy by providing a range of convenient payment options. There is a guide for the different payment methods supported by HobbyWOW.com, so you can choose the most appropriate payment method as you like:
1.Paying with paypal
PayPal is a secure and trusted payment processing service that allows you to shop online. PayPal can be used at HobbyWOW.com to purchase items by Credit Card (Visa, MasterCard, Discover, and American Express), Debit Card, or E-check (i.e. using your regular Bank Account).
Alipay is the third-party payment company of China Alibaba group, Checkout to ensure your shopping process, easy of use, privacy and account security,If you do not have paypal account, this is good choose for you!
We understand that you demanding safe shopping, and we are so strive to make the refund process is transparent,convenient, if your order can not be normal due to inventory adjustment or lack of the item, we would contact with you as soon as possible for refund.
Once you are not satisfied with our service or product, you may contact with us in 7 days after you receiving the package.PLEASE NOTICE:you should pay the return shipping freight!
Refund conditions: Package and accessories should be returned together. Of course can not damaged by people!
If apply with our refund condition, after confirming we would refund for you in 24 hours.
Please pay attention to following questions before placing the order.
1. How about warranty on RC copters/planes and electronic components?There is no warranty due to the nature of the products. No factory will provide the warranty for the RC copters/planes. Please be careful to handle your copters or planes.
RC models are fragile. They are likely to be damaged due to an operational error or the fact that you do not know how to fly model aircraft, and any collision or hard landing may cause damage to the helicopter or plane. We cannot control your flying skills, actions, or the flight site you choose. We will not bear any responsibility for the damages due to personal usage or loss, and any claims because of the wrong operations of the products, using failure or malfunction will be rejected.
2. Do you inspect and test the RC copters/planes and parts before shipping?To ensure the quality of all available models on our website, we always do a very rigorous control before packaging. All merchandise is in perfect operating condition before shipment. When you receive the product, it will be in good working condition.
3. What should I do if the products are not working as soon as I received?Please don’t worry about it. Most importantly, please contact our customer service with email as soon as you received. You should contact us in 1-2 days. If you don’t contact us in time, we will not be responsible for this fault.Please attach the photos /videos to show the problems. In this way, it is easier to diagnose the failure. If you refuse to provide this information, we will not be responsible for this fault.
4. What should I do if the products are broken in the transportation?If the package is obviously damaged, firstly, please refuse to pick up the package and then you can contact us and explain this situation to us by email. In this case, if you pick up it, we will not be responsible for it.If the package is not obviously damaged and you have delivered the package, please contact us and attach the photo of the package and broken items. We will check them. We have rich experience and will know if it is broken in the transportation. After check, we will give you a solution.
5. The item was used for many times but it was broken, crashed or failure can I have replacement?We are sorry that we cannot provide the replacement in this case. To ensure the quality of all available models on our website, we always do a very rigorous control before packaging and all products are Brand-new. We cannot know how many times you have used and you cannot prove that how many times you have used. So please understand we will not be responsible for this case.Of course, we can provide the fix service. The customers can return the items to our company and we will contact the supplier to fix it. But the customers need to pay all the shipping cost and fix fee.
6. If I don’t want this item without any reason, what can I do?If the package is on the way, please refuse to pick up the package. The package will be returned to us. In this case, you have to pay all shipping cost and 10% restock fee and other taxes what is caused by import. Besides, you should keep all item and package in original condition. After we received the package and make sure that there is no problem, we will give you the partial refund. If you have delivered the package, you have to contact us in 2 days after you received. Out of this time, we will not accept returning. You have to pay all shipping cost and 10% restock fee and other taxes what is caused by import. Besides, you should keep all item and package in original condition. Before you return, you have to contact us to get “return number “. If you don’t contact us and return the package,we will not be responsible for this. After we receive the package and make sure that there is no problem, we will give you the partial refund.
7. If I want to cancel the order and the order has been shipped out, can I get a full refund?We are sorry that we will not full refund to you. In this case, we suggest that you deliver the package. If you insist on refusing or returning the package, you have to pay all shipping cost, and 10% restock fee and other fees.
Questions and Answers
|What type question would you like to ask?|
|Remaining Count: 0/3000.|